Tip: 322mm
Underfoot: 265mm
Tail: 300mm
Radius: 8m

• One piece Ptex base
• Hardened Steel Edges
• Paulownia and ash wood core is light and gives a nice firm flex
• Bamboo sidewalls make it lively and pop
• Cork tip and tail spaces absorb vibrations
• Hemp/Canapa fibre glass smoothes out chatter
• Carbon Stringer keeps the board the same day after day
• Wood topsheet cuts down on plastic production
• Entropy Bioresin is the most environmentally friendly resin

Please look after your board. It’s special and took me a long time to make. Ride it hard it’s made for fun. Waxed and tuned is always better. 3D Bases don’t want to be ground. By hand working through 80, 120 and 220 grit, gives a nice finish. Work from tip to tail, long and smooth, wet the base whilst working. The sidewalls and topsheet are wood which is alive. Please keep them well varnished and oiled. They can be lightly sanded with 220-300grit wet and dry. To revarnish them use either Osmo UV protection oil or Epifanes UV proof high gloss varnish, follow their instructions. A few coats are better than one.